A) Flow rate of each row in the system
B) Green lines show module flow rates
C) Red line indicates target application rate
D) Black lines show programmed sections
E) Real time average for each module
F) Target rates for Products 1 & 2
G) Switches display between Products 1 & 2
H) Current speed / test speed
OnSite FMS is a simple solution for monitoring the application of in-furrow liquid row by row on your planter. The system is composed of four pieces.
If you are already applying in-furrow fertilizer, you know the benefits it can give your crops. What you probably don’t know is how effectively you are applying it to your field. You know how much fertilizer you used, but you probably don’t know how evenly it was spread from row to row.
OnSite FMS precisely measures flow rates on each row in real time. You’ll see problems as they start to develop, not after it’s too late. When each seedling has equal access to nutrients they all grow at the same rate, giving you a beautiful, uniform stand and the most consistent yield from each plant across the entire field.
That’s why we say OnSite FMS+ gives you beautiful fields and bountiful yields.
Watch the flow rate for each row in real-time on an easy-to-read 7” HD display right in your cab. The easy to read bar graph makes it obvious at a glance which rows are plugging-up and which are over-applying product in real time, allowing you to make adjustments before small issues become big problems that impact emergence.
Rows get clogged when you are planting. You can’t stop it, but you can catch it early. When a row turns red, it is getting clogged. You will know exactly how badly it is affected and can quickly make necessary adjustments to ensure you are getting the optimal amount of fertilizer in each row.
OnSite’s easy-to-understand 7” HD display always gives you full visibility of your flow rates on each row. Our simple bar graphs show you in real time if the flow rate is dropping on one row or spiking on another. You can tell at a glance how the system is running and make necessary adjustments.
Unlike floating balls, OnSite’s’ big touchscreen works just as well at night or in poor visibility conditions. OnSite FMS also works equally well with any density (or color) of liquid fertilizer. OnSite is always ready to go when you are.
OnSite is available with either a traditional wired monitor or optional Bluetooth module to wirelessly communicate from the planter to the 7″ touchscreen without running any wires. All OnSite FMS systems come standard with a heavy duty RAM Mount for the monitor.
Take the guesswork out of your in-furrow fertilizer investment and see exactly how your planter is running by adding OnSite to your planter today. Call 605-213-1010 now to order yours.
OnSite FMS is designed to easily replace your current floating ball system. We designed OnSite FMS to be a direct bolt-on replacement to a typical floating ball system. You won’t have to replumb your tractor, just remove your floating balls and bolt OnSite FMS in its place.
If you are looking to add starter fertilizer for the first time, we have complete kits with everything you need. You get the tanks, brackets, hoses, fittings, mounting hardware and fertilizer tubes. Each kit is designed to be a complete system that gives you everything you need to easily bolt up to your specific planter.
OnSite makes installation easy. Everything you need is included in your kit, from monitors and wiring harnesses to brackets and mounting hardware. OnSite makes wiring harnesses to fit any planter configuration. Each connector is clearly labeled so you know exactly where they go. Bluetooth options are available making the installation even easier.
If you do get stuck, our knowledgeable staff is only a phone call away. Installation services are also available through OnSite’s dealer network.
We know you can’t afford down time during planting season. OnSite’s components are designed to stand up to years of heavy use in the field and rigorously tested under extreme conditions. Each kit you order is programmed and tested together as a unit at the factory before being shipped to ensure that the system you receive will work flawlessly out of the box.
On the rare occasion something does go wrong, OnSite stands behind our products with a full satisfaction guarantee. OnSite FMS+ is extremely easy to work on. We can usually get you back up and running in a single phone call. If the problem is more serious, we will do whatever it takes to get you back in the field ASAP.
